At office buildings, hotels or commercial centers, elevators play a very important role in coordinating traffic within the building.
Installing elevator system with appropriate calculations will help people move faster and more efficiently.
Elevators are not merely a means of transportation, but in the central business district, elevators are often installed glass materials to allow observation from the inside to the surrounding scene. The elevators all have diversified and elegant design, suitable for the overall architecture of the building.
Using many modern technologies, today's elevators have many smart features, flexible operation and safer for users.
If properly maintained, elevators will work more sustainably and prolong the usage.
Advantages of Passenger Lifts , If using the word GOOD, MODERN to describe passenger elevator, it is necessary to converge the following characteristics: 1
1. Selective control : In buildings, businesses that install optional lift modes for passenger lifts, this usage must comply with regulations.
- For example: a building with 3 stairs and 7 floors, people will install the first ladder to the 3rd floor and then back, the 2nd ladder to the 5th floor, the 3rd ladder to 7th floor ... If in the mode automatically, passenger lifts load in the running direction, when getting on or off, you can return to the destination.
2. Adjusting opening / closing time : You are bothered when the passenger elevator closes too quickly, but this amount of time can be completely set by computer. This time affects the entire journey up and down in the building. If the waiting time for the door is too long, the user can press the button to quickly open the door to save time when no one is outside.
3. Full-automatic, full-direction assembly : The control programmed, the floor call signal microprocessor will in turn serve calls in the moving direction, then the ladder will serve the opposite direction.
4. Automatic cancellation of dialed orders in reverse direction : When the ladder reaches the last registered floor to prepare for service matching, the ordered reverse order will be canceled.
5. Automatic storage of errors : Especially, the ladder system is capable of remembering 20 previous errors so that it can improve the efficiency of the repair process.
6. Automatic running to the waiting floor: When the ladder is in normal operation, if there are no calls in the cabin or calls to the floor, the ladder will automatically run to the waiting floor to wait for guests after a while. custom.
7. Priority operation mode : When the status switch is activated in the upper priority switch box with the control in let go, the door can only be closed when the door is closed. All outside calls at the door floors will be isolated, the ladder only performs calls in the elevator chamber.
8. Automatically turn off lights, elevator fan in standby mode to serve guests : If the ladder stops after a custom time (default is 10 minutes), without any calls, the lights and ventilation fan in The cabin will automatically turn off until there is a new call (Auto on / off)
9. Door opening and closing safety thanks to infrared blinds : Passenger elevator doors are fitted with infrared blinds (god eye) long bars along the height of the door. This is very safe for the user, when there is an object or people standing in the middle of the door, the door ladder will remain open and wait until the obstacle is gone or the person, the ladder will automatically close.
10. Locking : Passenger elevator is the smartest installed elevator, because the number of passengers that the elevator serves each day is very crowded. The elevator lock function will help the elevator to load passengers more flexibly and save more. When this function is activated by a key switch at the floor, the ladder will serve all calls in the previously registered cabin, then the ladder will return to the main floor, automatically open the door, after about 10 seconds. will shut off the fan lights, the ladder will be in a non-service state.
11. Overload protection function : Each passenger lift will have a certain load, when it exceeds the permissible load, the ladder door will not close and send a warning signal to let the people inside take off. outside to reduce the load.
12. Ignore floor calls when the ladder is loaded with full load : When the ladder goes up or down but in the cabin with full load, the ladder will not stop at the floors with the call command. This shows that the passenger lift is very intelligent and flexible.
13. Overspeed protection: In case the elevator chamber moves beyond the rated speed, the speed control will be activated and act on the safety brake system to stop the elevator chamber.
14. Emergency lights and intercom telephone: In case the power is lost or the ladder has a problem that stops working without opening the door, the rescue light will automatically turn on, the passenger will use the intercom phone. - Intercom to contact the external person.
15. Protection function when the load cable has slip on the pulley: Cable slip usually occurs for passenger lifts. If the ladder journey is greater than the time allowed (up to 45 seconds), it means that the ladder has slipped cable, the ladder will stop working and wait for the elevator technician to come and reset the cable system and cabin.
16. Protection does not exceed the stroke : The inertia when the car moves up and down in the pit is very large, so the PIT hole and the engine room are installed limit switch switches so that the cabin cannot pass through This precaution, as this is dangerous for people inside the cabin.
17. Protect the system when the speed controller fails: The ladder will go into the emergency stop state in any operating state if it detects that the speed controller (inverter) is faulty.
18. Automatic rescue when power failure : In case the elevator is moving but there is a power outage, the automatic rescue kit will use the UPS power supply to bring the staircase to the nearest floor and open the door. let the guests out. The elevator will stop at that floor, and will operate automatically when power is restored.
19. Protection of phase loss, phase difference, reverse phase, over current : In case of power failure on phases, the system will automatically shut down the operation of the ladder to protect motors and electrical equipment.
- Company elevator Thien Nam committed to the entire process of choosing equipment and materials imports, production to execution and installation in buildings are monitored closely by the quality management system ISO 9001: 2008. The elevator equipment products are certified for conformity and tested for safety before being put into use.
- Types of Thien Nam elevator products are insured nationwide and supported by 24/7 customer care service.
I. Machine Room.
1. Construction of the machine room in accordance with shop drawing provided by Thien Nam. The walls and the ceiling shall be finished with waterproof plaster. Door equipped with a lock.
2. Cutting openings to lift the equipment and roping. Wiring from machine room to hoistway. Provision hoisting hook.
3. Corridor, stairway, ladder to the machine room should be unobstructed. Stairs should be equipped with handrails and 700mm minimum in width.
4. Ventilation: installing ventilation grilles, fans ventilation. The temperature of the machine room shall be below 40 ° C. The relative humidity should not exceed 90% monthly average and 95% daily average.
5. Lighting: setting natural lighting windows, fluorescent lamp and switch.
6. The machine room power - 01 Power supply panel: The power should be three-phase (380V - 50Hz) four-line and grounding. Power supply voltage variation does not exceed ± 5%.
II. Hoistway & Landing Doors.
1. Construction of an illuminated, ventilated, and water-proofed elevator hoistway, in accordance with shop drawing provided by Thien Nam. The tolerance of perpendicular line over the whole hoistway height must not exceed + 25mm.
2. Provision a ladder to the elevator pit.
3. Cutting openings for installing landing doors, hall buttons and indicators. Finish after installation.
4. Provision separated beams if two or more connected elevators in one hoistway & safety separated fence between the pits.
5. Water pipes, electrical wires ... etc, must not be assembled inside hoistway.
6. Provision intermediate beams if floor height is over 2600mm.
III. Special Remarks.
1. Provision all electric power for lighting, tools, welding etc during installation and test operation.
2. Provision a secured area for storage of elevator equipment and material during installation.
At office buildings, hotels or commercial centers, elevators play a very important role in coordinating traffic within the building.
Installing elevator system with appropriate calculations will help people move faster and more efficiently.
Elevators are not merely a means of transportation, but in the central business district, elevators are often installed glass materials to allow observation from the inside to the surrounding scene. The elevators all have diversified and elegant design, suitable for the overall architecture of the building.
Using many modern technologies, today's elevators have many smart features, flexible operation and safer for users.
If properly maintained, elevators will work more sustainably and prolong the usage.
Advantages of Passenger Lifts , If using the word GOOD, MODERN to describe passenger elevator, it is necessary to converge the following characteristics: 1
1. Selective control : In buildings, businesses that install optional lift modes for passenger lifts, this usage must comply with regulations.
- For example: a building with 3 stairs and 7 floors, people will install the first ladder to the 3rd floor and then back, the 2nd ladder to the 5th floor, the 3rd ladder to 7th floor ... If in the mode automatically, passenger lifts load in the running direction, when getting on or off, you can return to the destination.
2. Adjusting opening / closing time : You are bothered when the passenger elevator closes too quickly, but this amount of time can be completely set by computer. This time affects the entire journey up and down in the building. If the waiting time for the door is too long, the user can press the button to quickly open the door to save time when no one is outside.
3. Full-automatic, full-direction assembly : The control programmed, the floor call signal microprocessor will in turn serve calls in the moving direction, then the ladder will serve the opposite direction.
4. Automatic cancellation of dialed orders in reverse direction : When the ladder reaches the last registered floor to prepare for service matching, the ordered reverse order will be canceled.
5. Automatic storage of errors : Especially, the ladder system is capable of remembering 20 previous errors so that it can improve the efficiency of the repair process.
6. Automatic running to the waiting floor: When the ladder is in normal operation, if there are no calls in the cabin or calls to the floor, the ladder will automatically run to the waiting floor to wait for guests after a while. custom.
7. Priority operation mode : When the status switch is activated in the upper priority switch box with the control in let go, the door can only be closed when the door is closed. All outside calls at the door floors will be isolated, the ladder only performs calls in the elevator chamber.
8. Automatically turn off lights, elevator fan in standby mode to serve guests : If the ladder stops after a custom time (default is 10 minutes), without any calls, the lights and ventilation fan in The cabin will automatically turn off until there is a new call (Auto on / off)
9. Door opening and closing safety thanks to infrared blinds : Passenger elevator doors are fitted with infrared blinds (god eye) long bars along the height of the door. This is very safe for the user, when there is an object or people standing in the middle of the door, the door ladder will remain open and wait until the obstacle is gone or the person, the ladder will automatically close.
10. Locking : Passenger elevator is the smartest installed elevator, because the number of passengers that the elevator serves each day is very crowded. The elevator lock function will help the elevator to load passengers more flexibly and save more. When this function is activated by a key switch at the floor, the ladder will serve all calls in the previously registered cabin, then the ladder will return to the main floor, automatically open the door, after about 10 seconds. will shut off the fan lights, the ladder will be in a non-service state.
11. Overload protection function : Each passenger lift will have a certain load, when it exceeds the permissible load, the ladder door will not close and send a warning signal to let the people inside take off. outside to reduce the load.
12. Ignore floor calls when the ladder is loaded with full load : When the ladder goes up or down but in the cabin with full load, the ladder will not stop at the floors with the call command. This shows that the passenger lift is very intelligent and flexible.
13. Overspeed protection: In case the elevator chamber moves beyond the rated speed, the speed control will be activated and act on the safety brake system to stop the elevator chamber.
14. Emergency lights and intercom telephone: In case the power is lost or the ladder has a problem that stops working without opening the door, the rescue light will automatically turn on, the passenger will use the intercom phone. - Intercom to contact the external person.
15. Protection function when the load cable has slip on the pulley: Cable slip usually occurs for passenger lifts. If the ladder journey is greater than the time allowed (up to 45 seconds), it means that the ladder has slipped cable, the ladder will stop working and wait for the elevator technician to come and reset the cable system and cabin.
16. Protection does not exceed the stroke : The inertia when the car moves up and down in the pit is very large, so the PIT hole and the engine room are installed limit switch switches so that the cabin cannot pass through This precaution, as this is dangerous for people inside the cabin.
17. Protect the system when the speed controller fails: The ladder will go into the emergency stop state in any operating state if it detects that the speed controller (inverter) is faulty.
18. Automatic rescue when power failure : In case the elevator is moving but there is a power outage, the automatic rescue kit will use the UPS power supply to bring the staircase to the nearest floor and open the door. let the guests out. The elevator will stop at that floor, and will operate automatically when power is restored.
19. Protection of phase loss, phase difference, reverse phase, over current : In case of power failure on phases, the system will automatically shut down the operation of the ladder to protect motors and electrical equipment.
- Company elevator Thien Nam committed to the entire process of choosing equipment and materials imports, production to execution and installation in buildings are monitored closely by the quality management system ISO 9001: 2008. The elevator equipment products are certified for conformity and tested for safety before being put into use.
- Types of Thien Nam elevator products are insured nationwide and supported by 24/7 customer care service.
I. Machine Room.
1. Construction of the machine room in accordance with shop drawing provided by Thien Nam. The walls and the ceiling shall be finished with waterproof plaster. Door equipped with a lock.
2. Cutting openings to lift the equipment and roping. Wiring from machine room to hoistway. Provision hoisting hook.
3. Corridor, stairway, ladder to the machine room should be unobstructed. Stairs should be equipped with handrails and 700mm minimum in width.
4. Ventilation: installing ventilation grilles, fans ventilation. The temperature of the machine room shall be below 40 ° C. The relative humidity should not exceed 90% monthly average and 95% daily average.
5. Lighting: setting natural lighting windows, fluorescent lamp and switch.
6. The machine room power - 01 Power supply panel: The power should be three-phase (380V - 50Hz) four-line and grounding. Power supply voltage variation does not exceed ± 5%.
II. Hoistway & Landing Doors.
1. Construction of an illuminated, ventilated, and water-proofed elevator hoistway, in accordance with shop drawing provided by Thien Nam. The tolerance of perpendicular line over the whole hoistway height must not exceed + 25mm.
2. Provision a ladder to the elevator pit.
3. Cutting openings for installing landing doors, hall buttons and indicators. Finish after installation.
4. Provision separated beams if two or more connected elevators in one hoistway & safety separated fence between the pits.
5. Water pipes, electrical wires ... etc, must not be assembled inside hoistway.
6. Provision intermediate beams if floor height is over 2600mm.
III. Special Remarks.
1. Provision all electric power for lighting, tools, welding etc during installation and test operation.
2. Provision a secured area for storage of elevator equipment and material during installation.
At office buildings, hotels or commercial centers, elevators play a very important role in coordinating traffic within the building.
Installing elevator system with appropriate calculations will help people move faster and more efficiently.
Elevators are not merely a means of transportation, but in the central business district, elevators are often installed glass materials to allow observation from the inside to the surrounding scene. The elevators all have diversified and elegant design, suitable for the overall architecture of the building.
Using many modern technologies, today's elevators have many smart features, flexible operation and safer for users.
If properly maintained, elevators will work more sustainably and prolong the usage.
Advantages of Passenger Lifts , If using the word GOOD, MODERN to describe passenger elevator, it is necessary to converge the following characteristics: 1
1. Selective control : In buildings, businesses that install optional lift modes for passenger lifts, this usage must comply with regulations.
- For example: a building with 3 stairs and 7 floors, people will install the first ladder to the 3rd floor and then back, the 2nd ladder to the 5th floor, the 3rd ladder to 7th floor ... If in the mode automatically, passenger lifts load in the running direction, when getting on or off, you can return to the destination.
2. Adjusting opening / closing time : You are bothered when the passenger elevator closes too quickly, but this amount of time can be completely set by computer. This time affects the entire journey up and down in the building. If the waiting time for the door is too long, the user can press the button to quickly open the door to save time when no one is outside.
3. Full-automatic, full-direction assembly : The control programmed, the floor call signal microprocessor will in turn serve calls in the moving direction, then the ladder will serve the opposite direction.
4. Automatic cancellation of dialed orders in reverse direction : When the ladder reaches the last registered floor to prepare for service matching, the ordered reverse order will be canceled.
5. Automatic storage of errors : Especially, the ladder system is capable of remembering 20 previous errors so that it can improve the efficiency of the repair process.
6. Automatic running to the waiting floor: When the ladder is in normal operation, if there are no calls in the cabin or calls to the floor, the ladder will automatically run to the waiting floor to wait for guests after a while. custom.
7. Priority operation mode : When the status switch is activated in the upper priority switch box with the control in let go, the door can only be closed when the door is closed. All outside calls at the door floors will be isolated, the ladder only performs calls in the elevator chamber.
8. Automatically turn off lights, elevator fan in standby mode to serve guests : If the ladder stops after a custom time (default is 10 minutes), without any calls, the lights and ventilation fan in The cabin will automatically turn off until there is a new call (Auto on / off)
9. Door opening and closing safety thanks to infrared blinds : Passenger elevator doors are fitted with infrared blinds (god eye) long bars along the height of the door. This is very safe for the user, when there is an object or people standing in the middle of the door, the door ladder will remain open and wait until the obstacle is gone or the person, the ladder will automatically close.
10. Locking : Passenger elevator is the smartest installed elevator, because the number of passengers that the elevator serves each day is very crowded. The elevator lock function will help the elevator to load passengers more flexibly and save more. When this function is activated by a key switch at the floor, the ladder will serve all calls in the previously registered cabin, then the ladder will return to the main floor, automatically open the door, after about 10 seconds. will shut off the fan lights, the ladder will be in a non-service state.
11. Overload protection function : Each passenger lift will have a certain load, when it exceeds the permissible load, the ladder door will not close and send a warning signal to let the people inside take off. outside to reduce the load.
12. Ignore floor calls when the ladder is loaded with full load : When the ladder goes up or down but in the cabin with full load, the ladder will not stop at the floors with the call command. This shows that the passenger lift is very intelligent and flexible.
13. Overspeed protection: In case the elevator chamber moves beyond the rated speed, the speed control will be activated and act on the safety brake system to stop the elevator chamber.
14. Emergency lights and intercom telephone: In case the power is lost or the ladder has a problem that stops working without opening the door, the rescue light will automatically turn on, the passenger will use the intercom phone. - Intercom to contact the external person.
15. Protection function when the load cable has slip on the pulley: Cable slip usually occurs for passenger lifts. If the ladder journey is greater than the time allowed (up to 45 seconds), it means that the ladder has slipped cable, the ladder will stop working and wait for the elevator technician to come and reset the cable system and cabin.
16. Protection does not exceed the stroke : The inertia when the car moves up and down in the pit is very large, so the PIT hole and the engine room are installed limit switch switches so that the cabin cannot pass through This precaution, as this is dangerous for people inside the cabin.
17. Protect the system when the speed controller fails: The ladder will go into the emergency stop state in any operating state if it detects that the speed controller (inverter) is faulty.
18. Automatic rescue when power failure : In case the elevator is moving but there is a power outage, the automatic rescue kit will use the UPS power supply to bring the staircase to the nearest floor and open the door. let the guests out. The elevator will stop at that floor, and will operate automatically when power is restored.
19. Protection of phase loss, phase difference, reverse phase, over current : In case of power failure on phases, the system will automatically shut down the operation of the ladder to protect motors and electrical equipment.
- Company elevator Thien Nam committed to the entire process of choosing equipment and materials imports, production to execution and installation in buildings are monitored closely by the quality management system ISO 9001: 2008. The elevator equipment products are certified for conformity and tested for safety before being put into use.
- Types of Thien Nam elevator products are insured nationwide and supported by 24/7 customer care service.
I. Machine Room.
1. Construction of the machine room in accordance with shop drawing provided by Thien Nam. The walls and the ceiling shall be finished with waterproof plaster. Door equipped with a lock.
2. Cutting openings to lift the equipment and roping. Wiring from machine room to hoistway. Provision hoisting hook.
3. Corridor, stairway, ladder to the machine room should be unobstructed. Stairs should be equipped with handrails and 700mm minimum in width.
4. Ventilation: installing ventilation grilles, fans ventilation. The temperature of the machine room shall be below 40 ° C. The relative humidity should not exceed 90% monthly average and 95% daily average.
5. Lighting: setting natural lighting windows, fluorescent lamp and switch.
6. The machine room power - 01 Power supply panel: The power should be three-phase (380V - 50Hz) four-line and grounding. Power supply voltage variation does not exceed ± 5%.
II. Hoistway & Landing Doors.
1. Construction of an illuminated, ventilated, and water-proofed elevator hoistway, in accordance with shop drawing provided by Thien Nam. The tolerance of perpendicular line over the whole hoistway height must not exceed + 25mm.
2. Provision a ladder to the elevator pit.
3. Cutting openings for installing landing doors, hall buttons and indicators. Finish after installation.
4. Provision separated beams if two or more connected elevators in one hoistway & safety separated fence between the pits.
5. Water pipes, electrical wires ... etc, must not be assembled inside hoistway.
6. Provision intermediate beams if floor height is over 2600mm.
III. Special Remarks.
1. Provision all electric power for lighting, tools, welding etc during installation and test operation.
2. Provision a secured area for storage of elevator equipment and material during installation.
Vietnam
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
Singapore
United States
United Arab Emirates
Denmark
Sweeden
Finland
Norway
